Description
For relieving the fork spring tension so that the tube caps can be removed from the rod. Can be used horizontally or vertically.
Simple to use: adjust the length to suit the fork length, locate the bottom of the fork on the pin of the compressor tool, align the two screws with the two holes in the internal sleeve of the fork, tighten the tool using a socket or spanner, this will pull down the collar and spring which will allow access to the nut securing the fork cap.
Simple tool for relieving the fork spring tension
Can be used horizontally or vertically
Maximum reach: 750mm
Maximum cylinder diameter: 100mm
Note: No instructions are included with this item, intended for use by suitably qualified operatives.
